Product Introduction

The structure design of the belt press dehydrator has advanced the technical level of the international counterparts. It effectively solves the problems of dehydration of plant wastes and slag materials, and can greatly reduce the moisture content of the materials. Especially suitable for long fiber slags, such as: cassava residue, soya residue, beer dregs, chicken manure, food waste, coco peat, palm oil residue and so on. The equipment has a high degree of automation, continuous production, large processing capacity, low moisture content of the slag cake after dehydration. Low energy consumption, low operating costs, easy operation and maintenance.

Product Application

Belt Press (press filter)Dehydrator is widely used for the dehydration of various plant wastes ,slag materials and Industrial sludge, including brewer slag, beer Residue, coco peat, palm oil residue, ceramic clay, clay, fire clay, coal slime, shrimp shells, food waste, chicken manure, beet slag，cassava residue, sweet potato residue, corn residue, bagasse, pomace, tea residue, soybean residue, household waste, coffee grounds, sludge and other materials. 

Working Principle

After a certain concentration of flocculant sludge concentrated in the static, dynamic mixer aftermixing the sludge tiny solid particles cemented together floc larger clumps, while separating out free water, after flocculation the sludge is fed to the filtrate concentrated gravitational dewatering belt, the free water is separated under the action of gravity, the flow state is not formed in the sludge, and then sandwiched between two upper and lower belt, after the pre-nip wedge, low Ascending area and pressing force of the high pressure zone, shear force, gradually squeeze the sludge in order to achieve the greatest degree of mud, water separation, and finally form a filter cake discharge.