Air enters into air distributor at the top of drier through filter and heater, and hot air evenly enters into dryer in spiral way. Liquid material is carried to centrifugal atomizer at dryers top by pump through filter from liquid material tank, where liquid material is sprayed as tiny drops, it concurrent flows to contact air, then water rapidity evaporates to turn into finished product in very short time. Since finished product is discharged from drying tower bottom and cyclone separator, waste gas vent emptily by extracting blower.
Technical parameters of this drying machine:
Model | 5 | 25 | 50 | 150 | 200-2000 |
Inlet temperature | 140-350 Self-control | ||||
Outlet temperature | 80-90 | ||||
Water Max. evaporate amount kg/h | 5 | 25 | 50 | 150 | 200-2000 |
Drive form of Centrifugal spray atomizer | Compressed air drive | Machinery dive | |||
Max, rotating speed(rpm) | 25000 | 18000 | 18000 | 15000 | 8000-15000 |
spray disc diameter(mm) | 50 | 120 | 120 | 150 | 180-240 |
Heat source | Electricity | Steam+ Electricity | Steam+ Electricity, Oil | Coal gas ,air heating furnace | |
Electric heating max. power kw) | 9 | 36 | 72 | 99 | |
External dimension(L*W*H) (m) | 1.8×0.93×2.2 | 3×2.7×4.26 | 3.5×3.5×4.8 | 5.5×4×7 | According to practice to determine |
Dry powder reclaim (%) | ≥95 |
Note: Amount of evaporation of water relates to materiel feature and inlet, outlet temperature of thermal wind. Outlet temperature is 90, for its water vaporization curve, see above fig.for reference when choosing types)
China
