The polluted water inputs the drum filter through the water inlet pipes, flows into the boxes, and then into the interior of the filtering drum. The filtering drum is covered with a V-slot micro mesh, all particles bigger than the filter mesh will stay inside the drum filter.

Working principle

The waste particles will slowly block the filter mesh, makes it hard for the water through the mesh, which leads to a lower water level in the clear water chamber of the filter. Once the water level dropped to a minimum level-indicated by sensor-the controller starts the washing process. The process contains the rotation of the filter drum by a geared motor and multiple nozzles spraying water with high pressure to the outside of the filter mesh. The waste clogged the filter mesh is flushed into the waste tray, and then leaves the filter by wastewater discharge through waste outlet.

Specifications

Model	TP-600	TP-800	TP-1000	TP-1200	TP-1400	TP-1600	TP-1800	TP-2000
Drum Diameter	600	800	1000	1200	1400	1600	1800	2000
Mesh length	650	850	1000	1200	1400	1500	1650	1850
Input tube OD	159	219	219	273	273	325	325	325
High water lvl H3	400	520	670	820	950	1100	1250	1350
Install angle	35°
Channel depth H2	600-800	700-1000	900-1200	1100-1400	1200-1600	1400-1800	1600-2000	1800-2100
Waste outlet H1	1000mm
Min install lengthA	3000	3300	3600	4000	4300	4700	5000	5300
Max water treat m³/h	Slot mm	0.5	80	135	235	315	450	585	745	920
1	125	215	370	505	720	950	1205	1495
2	190	330	555	765	1095	1440	1830	2260
3	230	400	680	935	1340	1760	2235	2755
4	235	430	720	1010	1440	2050	2700	3340
5	250	465	795	1105	1575	2200	2935	3600

*Above parameters only for reference, customized available for detailed requirements