Hydrocyclone Introduction
Hydrocyclone is a kind of equipment used for grading the ore pulp by using centrifugal force. Without motion and power unit, it needs to match with relevant slurry pump. It is mainly used in ore dressing industries for grading, separating, concentrating and desliming.
hydrocyclone Main Performance:
Working principle: Ore-mud can enter the drum with the help of a certain pressure (usually 0.5 to 2.5 kg / cm) and velocity (about 5 to 12 m / sec) that caused by slurry pump, and the ore-mud will rotate with the surface of drum, and cause quite strong centrifugal force, rough or big ore-sand will move downwards with the centrifugal force and gravity. Then they will be discharged from the underside of the cone, whereas some thin sand will be discharged from the overfalling pipe.
Hydrocyclone eatures:
The device has features of simple structure, long service life, large disposal capability, small land covering and no driving power consumption. It is a high efficient grading and de-sliming equipment of fine -particle material.
Hydrocyclone Main Technical Datas:
odel | inner diameter(mm) | Feeder diameter(mm) | overflow pipe diameter(mm) | Grit size(mm) | cone angle(°) | Max feeding size (mm) | feeding pressure(Mpa) | capacity(m/h) | Partition size(μm) | overall dimention | Weight(kg) | ||
(L) | (W) | (H) | |||||||||||
FX-660 | 660 | 187,167 | 180,200,220,240 | 80,110,150 | 20 | 16 | 0.03-0.4 | 250-360 | 74-220 | 1215 | 850 | 2720 | 950 |
FX-500 | 500 | 130120 | 130,140,160,180,220 | 35,45,50,6570,80,90,100 | 25 | 10 | 0.03-0.4 | 140-220 | 74-200 | 951 | 718 | 1825 | 416 |
20 | 74-200 | 850 | 623 | 1825 | 490 | ||||||||
10 | 74-150 | 951 | 718 | 2280 | 556 | ||||||||
FX-350 | 350 | 80 | 80,90,105,115,120 | 30,35,40,45,50,60,70 | 25 | 6 | 0.03-0.4 | 60-105 | 50-150 | 530 | 413 | 1411 | 135 |
20 | 50-150 | 530 | 413 | 1411 | 155 | ||||||||
15 | 50-120 | 530 | 413 | 1674 | 230 | ||||||||
FX-300 | 300 | 6475 | 65,80,100,120 | 20,25,30,35,40 | 20 | 5 | 0.03-0.4 | 45-90 | 50-150 | 530 | 410 | 1305 | 88 |
15 | 40-100 | 563 | 410 | 1490 | 169 | ||||||||
FX-250 | 250 | 557480 | 60,75,80,100,120 | 16,18,20,25,30,35,40 | 20 | 3 | 0.05-0.4 | 40-65 | 40-100 | 563 | 534 | 1178 | 63 |
15 | 40-100 | 548 | 390 | 1057 | 120 | ||||||||
10 | 30-100 | 548 | 415 | 1380 | 123 | ||||||||
FX-200 | 200 | 48 | 40,45,55,65 | 16,20,24,28,32 | 20 | 2 | 0.05-0.4 | 25-40 | 40-100 | 548 | 307 | 1025 | 36 |
15 | 30-100 | 320 | 307 | 1114 | 64 | ||||||||
FX-150 | 150 | 36 | 30,35,40,45 | 8,10,12,14,16,18,20,22 | 20 | 1.5 | 0.05-0.4 | 11-20.0 | 30-74 | 320 | 270 | 682 | 22 |
15 | 30-74 | 252 | 349 | 899 | 20 | ||||||||
8 | 20-74 | 290 | 295 | 1267 | 60 | ||||||||
FX-125 | 125 | 26 | 25,30,35,40 | 8,10,12,14,16,18 | 17 | 1 | 0.05-0.4 | 8-15.0 | 20-100 | 280 | 185 | 617 | 10 |
8 | 20-74 | 210 | 240 | 973 | 12 | ||||||||
FX-100 | 10 | 23 | 20,25,30,40 | 8,10,12,14,16,18 | 20 | 1 | 0.05-0.4 | 5-12.0 | 20-100 | 250 | 210 | 525 | 8 |
15 | 10-100 | 257 | 210 | 575 | 5 | ||||||||
8 | 10-74 | 257 | 210 | 829 | 6 | ||||||||
FX-75 | 75 | 13 | 15,17,20 | 6,7,8,10,12 | 15 | 0.6 | 0.1-0.5 | 2-5.0 | 20-74 | 240 | 230 | 459 | 4 |
7 | 5-40 | 240 | 230 | 700 | 7 | ||||||||
FX-50 | 50 | 9 | 11,13,15,18 | 3,6,8,10,12 | 15 | 0.3 | 0.1-0.5 | 1.5-3 | 10-74 | 160 | 152 | 325 | 2 |
6 | 5-30.0 | 160 | 152 | 550 | 2.5 | ||||||||
FX-25 | 25 | 5 | 5,6,7,8 | 2,3,4,5 | 5 | 0.2 | 0.1-0.5 | 0.3-1 | 3-10.0 | 160 | 152 | 587 | 0.8 |
3 | 2-10.0 | 120 | 110 | 576 | 1.4 | ||||||||
FX-10 | 10 | 2 | 2,3,4 | 1,2 | 4 | 0.1 | 0.1-0.1 | 0.05-1 | 1-5.0 | 60 | 34 | 140 | 0.5 |