Main Technical Indexes
1. Measurement deviation:Class±0.5%F·S±1b,additional cold end compensation
deviation ±2C
2. Input Type:CU50(-50~150.0),PT100(-199.9~600.0),K(-30~1300),
E(-30~700),J(-30~900),T(199~400),S(-30~1600),
R(-30~1700),0~10V (-1999~9999),4~20mA (-1999~9999)
3. 0.8"LED tube and four digit display
4. Working power:AC/DC 24V~36V
5. Working condition:0~50C,relative humidity≤85%,without corrode and strong electric radiation.
Interior parameter
1. Measurement deviation:Class±0.5%F·S±1b,additional cold end compensation
deviation ±2C
2. Input Type:CU50(-50~150.0),PT100(-199.9~600.0),K(-30~1300),
E(-30~700),J(-30~900),T(199~400),S(-30~1600),
R(-30~1700),0~10V (-1999~9999),4~20mA (-1999~9999)
3. 0.8"LED tube and four digit display
4. Working power:AC/DC 24V~36V
5. Working condition:0~50C,relative humidity≤85%,without corrode and strong electric radiation.
Interior parameter
| Series | Attention | Name | Setting range | Manual | Remarks |
| 0 | Loc | Electronic lock | 0~50 | LOC =0,all the parameter can be revised or it can't. | 0 |
| 1 | Sn | Input type | - | CU50( ),PT100( ), K( ),E( ),J( ),T( ), S( ),R( ),0~10V( ),4~20mA( ) | |
| 2 | dP | Decimal point | 0~3* | When dp=0,display format is 0000; When dp=1,display format is 000.0; When dp=2,display format is 00.00; When dp=3,display format is 0.000 | 0 |
| 3 | dIL | Lower limit | dIL≤dIH | When input signal is current or voltage , you can set the corresponding display number. As for other use, please refer to "Some useful samples for calibration"in the part No. IV | 0 |
| 4 | dIH | Upper limit | 5000 | ||
| 5 | SC | Measurement deviation revisal | -20.0~20.0 | Thermocouple and thermal resistance can modify the scope of ±20.0; Current and voltage signals can modify the scope of ±200(dp=0) | 0 |
China
