High Shear Emulsification Tank strictly follow the Article 31, 32 of GMP general rules "Good Manufacturing Practice" (Revised in 2010),and according to the "Pressure vessels" (GB150-2011), "Steel welded normal pressure vessel (with standard definition)" (NB/T 47003.1-2009) requirements for the design, manufacture and acceptance.
High Shear Emulsification Tank use square single layer stainless steel,and the inner wall of the tank body is made of circular transition, , no dead corner, easy to clean;and the bottom with mechanical emulsification .
Tank body and bottom head of High Shear Emulsification Tank can be equiped with an insulation layer according to the customers' requirements.
High Shear Emulsification Tank use square single layer stainless steel,and the inner wall of the tank body is made of circular transition, , no dead corner, easy to clean;and the bottom with mechanical emulsification .
Tank body and bottom head of High Shear Emulsification Tank can be equiped with an insulation layer according to the customers' requirements.
| Tank optional configuration |
| High Shear Emulsification Tank optional configuration: sterile air filter, thermometer (digital display type or dial), sight glasses, sanitary manhole, in-outlet, CIP universal rotating cleaning ball, sterile sampling valve (stainless steel tank bottom), the liquid level meter and liquid level self-control system (bearing module, non-contact ultrasonic, static pressure transmitting device), etc., or configured according to customers' requirements. |
| Feature |
| • There are 600L~5000L varietys of specifications, it can be designed, customized according to the customers' requirements. • Connector use fast installation chuck (clamp), inner tank use SS304 or SS316L, the inner surface mirror polishing Ra≤0.28μm~0.6μm, outer surface can be polishing, wiredrawing ,sandblasting according to customer's requirement. • High Shear Emulsification Tank use mechanical emulsification at bottom, adopt claw type occlusion, double suck material structure; high speed mixing and emulsification, can be suitable for different mixture, mixing, dispersion, emulsification, homogenization. • Emulsification shaft seal use sanitary mechanical seal, emulsification motor can use planet-cycloid retarder, stepless reducer according to the customers' requirements . |
| Design Parameter | Material | ||||
| Design pressure | Normal pressure | Inner tank | 304,316L | ||
| Insulation layer | Rock wool ( keep warm ) or PU ( keep cool ) | ||||
| Design temperature | Tank body, Jacket according to the customers' requirements(0ºC~160ºC) | Feet | 304 | ||
| Connection | |||||
| Surface Finish | |||||
| In-outlet | Quick-open , flange | ||||
| Finish type | Mechanical polishing, electrolytic polishing, Sand blasting , pickling | ||||
| Polishing precision | Inner wall 0.4μm,outer wall 0.6μm |
China
