1.The boiler heater adopts the direct heating tube.
2.Since the boiler adopts electric heating, only the boiler body heat dissipation loss, the thermal efficiency can reach up to 97%, completely realize zero pollution.
3.The heating is uniform and stable, and the evaporation area is large.
4.The heating production is rapid and the thermal efficiency is high.
5.In addition to conventional pressure control, also equipped with automatic drainage systems, advanced process control, automatic chain, automatic alarm, and realizes automatic control, heater classification start and stop, reduce the impact on the grid, overheating, over-voltage, water shortage, short circuit, lack of phase, leakage, such as automatic protection function, safe and reliable, easy to operate.
6.The water level controller provided by this boiler has automatic control of water supply and water level alarm and chain function.When the water level is lower than the control point of low water level, the pump is automatically started to feed water to the boiler;When the water level is below the control point of low water level, automatic alarm and cutting off the heating element shall be manually reset.When the water level is above the control point of the highest water level, automatic alarm and cutting off the heating element shall be manually reset.
7.The boiler is equipped with a safety valve. When the steam overpressure, the relief valve will automatically open the discharge steam to ensure the safety of the boiler;When the pressure is reduced to a specified value, the relief valve is automatically closed again to prevent the pressure from falling.
This boiler is a horizontal electric heating steam boiler, mainly consists of front, back tube plate, tube and electric heating tube.
It provides steam for printing and dyeing industry, chemical industry, pharmaceutical industry and other enterprises, hotels, restaurants, etc. It can also provide hot water for life through heat exchanger and water tank heating.
FAQ
1. What can you get from us before quotation?
A:After confirming all the details about your requirement, we will provide you with several sets of related project pictures we have done before. Once you are satisfied with our strength and our products, lets continue.
2. Below are the details need your confirmation before quotation.
A: 2.1. What type boiler you need, steam boiler, thermal oil boiler or hot water boiler?
2.2. What is the fuel type for you boiler, biomass(coal, shell, pellet etc.), gas or oil?
2.3. What is the requirement for oil/steam temperature and pressure?
2.4. What is the evaporation capacity of boiler required?
3. How long can we get the reply with detailed information for our project?
A: For single boiler, usually you can get the detailed offer within 1 day after details confirmed; For whole set project; the time takes longer and usually 2-3 days for tentative plan and process flow drawing.
4. What is your advantages for the whole project?
A: We have been in the boiler equipment fields for many years and obtain a good reputation with the up/down partner. So we have much richer resource in different fields like the burn system PIC control instrument, raw material qualiy selecting shipping installation etc. We are comprehensive company with experiences for different fields.
5. What is warranty for your equipment and whole set of project?
A: For boiler body, we provide you with 2 year quality warranty.for all the parts of our equipment by repairing or replacing, damage caused by human excepted. For whole project, our engineer will stay in your site for equipment installation, debugging and training till you get standard products from the equipment. If necessary, we will also help you find an engineer to work for you for 1 or 2 year for your plant management.
China