Jiangsu zhenxing drying equipment co.,ltd,this is Drying Equipment manufacture. We are specialized in development, manufacturing, and installation of dryers, mixers, granulators, grinders, conveyors, sieve and etc.
We follow a strict quality control procedure and we provide high quality products with prompt after sales services and technical supports.
Our products have been exported to North America, Pakistan, India, Philippines, Thailand, Nigeria, South Africa, Mexico, Colombia, Australia, Egypt, Vietnam, Russia, and other countries.
We truly believe that honesty, credibility, and integrity are the keys to build a widely successful business!
We are strictly complying with the international technical standards and quality management systems and we became the leading company in the drying equipment industry. We also dedicated in the environment protection and energy conservation industry.
Our company mission and top priority is to be our customer’s best business partner by consistently providing quality products and good after sales service. We will keep continuous improvement to our products and services in order to provide high quality equipment to our customers
We are providing the continuous training programs and safe working environments to all of our employees and we are making our best efforts to ensure the development of the company.
Rotary Drum Drier is a kind of dryer with rotating cylinder body which is a little bit incline. The wet material is loaded from one end from the screw material adding device continuously, and is stirred by the bafflers that are uniformly distributed in the barrel.
The material is uniformly distributed and dispersed in the dryer and fully contacts the hot air of counter flow. When the material passing through the cylinder inside surface, it will contact with the hot air circling inside and being dried .Most of the dried product will be discharged from the other end of the dryer. Small part of the fine granule goes into the cyclone separator with the exhaust air. The powder will be separated and collected, and the exhausted air will be ejected to the atmosphere. During the drying course, the material will slowly move to the lower end from the higher part recur to the slowness rotating of the cylinder.
(1) Large throughput capacity and continuous operation
(2) Simple configuration and easy to operate
(3) Good adaptability of materials
(4) Low energy consumption
(5) Low maintenance cost
- Drying large particles and heavy material for chemical, mining, metallurgy and other industries, such as: mining, blast furnace slag, coal, metal powder, fertilizer, ammonium sulfate.
- Drying powder or granular materials which have special requirements, such as: HP vesicant, lees residue, precipitated calcium carbonate, activated clay, magnetic powder, graphite, dregs.
- Drying the material which required low-temperature and continuous drying process.
We solicit buyers opinions widely at the design and production stage of equipment; especially at the stage of plan and elevation arrangement, we give full consideration to buyers’ site conditions and public engineering conditions, and pay concurrent attention to the optimum combination when assuring the quality of equipment.
Installation and commissioning
After the equipment is delivered to buyers factory, we will dispatch full-time technical personnel to instruct buyers’ installation and to take charge of commissioning until normal use of the equipment.
Training
Before buyers use our equipment normally, our commissioning personnel will organize buyers’ relevant personnel to accept training, which covers the maintenance and care of equipment, timely repair of common faults, and procedures for operation of equipment.
Warranty
We provide one-year warranty for our equipment. For damage of equipment arising from non-artificial factors within the warranty period, we will provide repair service for free; and for damage of equipment arising from artificial factors, we will provide repair service in time and collect corresponding cost.
Maintenance and period
For damage of equipment after expiration of warranty period, we will provide on-site repair service within 24h/48h for enterprises inside/outside the province after receiving buyers’ notification. The service provided after expiration of warranty period is fee-based, and flat cost will be collected each time when the service is provided.
The oat groat fluid bed dryer equipment
Name: oat groat
Water content：15%
Final water content：9.5%
Output capacity： 500kg/h
Heat source：steam
The dryer technical parameter
Evaporate amount：32kg/h
Inlet temperature： 100-120℃（adjustment）
Outlet temperature：20℃
The equipment model
Name :Fluid bed dryer
Size：ZLG-7.5×0.6
The pigment belt dryer equipment
This is belt dryer are customized to the Indian customer, Heat source：clean flue gases（heat exchanging type coal-fired hot air furnace, output quantity of heat is 160×104Kcal/h
Usage temperature：180-130℃
Circulating air volume：each section ≈18000 m3/h
Total installed power:120kW
Overall dimensions (L×W×H)：19000×2400×3100mm
it is used widly in chemical filed.
The spray dryer equipment.
1. Name of material: coffee (instant)
2. Initial solid content: 35%
3. Output: 1000kg/h (final moisture: ≤3.5%)
4. Evaporation capacity: 1650kg/h
5. Inlet air temperature: 190°C (adjustable)
6. Outlet air temperature: 85°C (adjustable)
7. Heating method: heat-transfer oil heat exchange
8. Recovery method: fluidized bed central pipe discharging
9. Dedusting method: cyclone cluster + wet scrubber
The flash dryer equipment
1. Material name: Manganese sulfate monohydrate
2.Feed capacity：5000kg/h
3.Evaporate amount：≤750kg/h
4.Powder water content：0.5%
5.Temperature：inlet 250-280℃，outlet 70-90℃
4.Install power：192kw
5.Gas consumption：140M3/H
China
