Mingyang brand Flash type hot air wood dryer for sawdust biomass

To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly.

Technical Feature

  • New
  • Drum Drying Equipment, dryer for sawdust biomass
  • Henan, China (Mainland)
  • Ming Yang
  • HJ-6
  • 380v
Send Standard Inquiry Add Inquiry List

0 Add Favorite

$2~8

PRIMARY PARAMETERS

Condition
New
Type
Drum Drying Equipment, dryer for sawdust biomass
Place of Origin
Henan, China (Mainland)
Brand Name
Ming Yang
Model Number
HJ-6
Voltage
380v
Power(W)
5.5kw
Dimension(L*W*H)
10*1.5*3.5m
Weight
1500kg
Certification
CE ISO
Warranty
12 months
After-sales Service Provided
Engineers available to service machinery overseas
Application
to dry wet sawdust
Raw material
Small Wood Powder
Raw materials diameter
between 1mm and 5mm
Output
400-500kg/h
The moisture before drying could be
40%
The moisture after drying
8-12%
Fuel
Waste Wood
Feature
energy saving
Supply type
factory direct sale

DETAIL DESCRIPTION

Mingyang brand Flash type hot air wood dryer for sawdust biomass

Product Description

  

Introduction of dryer for sawdust biomass  :

Drying is important before briquetting process. To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.

 

 

Hot airflow type dryer:
A: Raw materials should be sawdust, suitable for drying the moisture20-50% Final moisture 8-12% .                          
B: Diameter of raw materials: <3mm & < 5mm.                    
C: Temperature of Hot Air: 180-250 °.                        
D: Working principle: The stoves (boilers) generate hot air, then through the fan to dry the materials.
E: This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.
F: The wood dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).

 

Double stove hot airflow type dryer:
This dryer is suitable for drying materials of moisture 30-60%. Wet material is input into the hopper. The dryer is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. This wood dryer can reduces the moisture to 8-12% one time with the advantages of lower cost consumption and high efficiency. 

 

 

The main parameter of dryer for sawdust biomass  :

The selection of drying plant models depends on the original moisture content of raw materials. we have two kinds of dryer machine,one is air flow type ,the other one is rotary drum type.

The technical data of air flow ones:

Model 

Power 

(kw)

Capacity 

(t/h)

Drying the 

Moisture content

Weight 

(t)

The area of land 

occupied by ( m³)

HJ-4

4

0.3-0.4

35%

1

8*1.5*3.5

HJ-6

5.5

0.4-0.5

40%

1.5

10*1.5*3.5

HJ-8

11

0.5-1.8

40-50%

2.5

14*1.5*4.8

HJ-10

15+0.75

0.6-0.7

50%

1.8

14*2*3.2

 

 

finally sawdust after drying:

 

How to make the charcoal briquette with using sawdust :

 1.Crush the raw material into small pieces (diameter is about 3-5mm).
 2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%.
 3. Put the material into feed let of briquette machine.
 4.Produce the briquette stick from biomass material without any additive.
 5.Carbonized the briquette stick.

 

Packaging & Shipping

If you order single machine,it can be packed in one wooden case.

If you order more machine or a production line, a 20 feet container or 40 feet container needed.

It like the following show:

 

 

Our Services

(1)Pre-sales service
a. Sales team will suggest suitable project.
b. Technical team analyse and design special molds for you.
c. Pick you up at airport, arrange hotel-booking.
d. Other travel arrangements.
(2)After-sales service
a. Assist you build up factory and production line.
b. Install and maintain machines.
c. Training your workers to achieve skillful operation.
d. Offer technical support through telephone or online videos at any time.
(3)Our shipping terms
We can accept EXW FOB and CIF terms.
Also our freight forwarding has high effieiency and quick shipping speed.
If stock machine, we can send out your products within 5 days.
If you need special molds or customized producion line, the delivery time according to you machine quantity, but we will send out as soon as possible.
(4)Our payment terms
T/T, L/C, Western Union or others.

 

 

Company Information

Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 26 years. 

There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) , 

production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine) 

production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette) 

and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.

Our machines have the best quality and we have got many certification such as CE, ISO, BV.

ave got many certification such as CE, ISO, BV.

 

 

Contact Information

If you have interest on our machine or have questions on our machine, please don't hesitate to contact us.

Gongyi Xiaoyi Mingyang Machinery Plant
Sales Manager: Sara yang 
Mobile: 008615039052280
Skype: sara666818  
whatsapp  008615039052280
wechat : 008615039052280

 

 

Send Consultations Sending PUBLIC question and getting response from the supplier

Send Only your public informations will be shown

All Consultations