Heavy duty Mining feed slurry pump hydrocyclone
1. Heavy duty Mining feed slurry pump hydrocyclone Introduction
The AM series horizontal centrifugal slurry Pump is the heavy duty pump handling tough and abrasive duties intended for clear liquids. It is the pump transporting Solid-liquid mixture with solid suspending (like ore, sand, gravel, ash and slime etc.) or the abrasive strongly and high concentration slurry.
The heavy and robust slurry pump and perfect used perfect impeller structure ensure satisfactory performance with long life and needs minimum maintenance requirements.
The Rubber liner slurry pump expand applications to chemical products handling, several different rubber options are available to meet different application needs, continuous pumping of highly abrasive/dense slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage, dredging of settling lagoons and pumping of drilling mud and tailings in minerals plants plus other industrial applications.
2. Heavy duty Mining feed slurry pump hydrocyclone Feature
The AM(R) series centrifugal horizontal slurry pumps are the best slurry pump for wear life, component arrangement and maintenance.
The Extra-Thick Wet End Components make the AM(R) series centrifugal horizontal slurry pump could handle the liquid with abrasive solid particles and extend the wear life Max, increase the mean time between failures with lowest maintenance by reasonable component arrangement!!!
1. The Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and lowest maintenance
2. The Large, open internal passages designed to reduce internal velocities, maximize wear life and lowest maintenance
3. Heavy duty construction with through-bolt design provides ease of maintenance and Min downtime
4. The Replaceable and Interchangeable Wet End Parts are lower the stocking cost, easy to repair and Min downtime
5. The Ductile iron fully lined casing provides durability,strength, safety, and long service life recommended while the Grey iron liner is the economic solution could satisfied the most customers required especially when you dont need the pumps work at 24x7
6. Minimal shaft/impeller overhang reduces shaft deflection and increases packing life and the mean time between failures
7. Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life, which is another way to increase the mean time between failures
8. Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime
9. Lower NPSH requirements results in enhanced hydraulic performance and extended the wear life
10. The metal or rubber parts are available for different work conditions Max the wear life and lowest the maintenance cost
3. Heavy duty Mining feed slurry pump hydrocyclone Application
The AM(R) series centrifugal horizontal slurry Pump is the pump for highly abrasive/dense slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage and tailing in minerals plants plus other industrial applications.
• Mining • Mineral processing • Construction • Chemical and Fertilization • Power generation |
• Phosphate matrix fertilization • Pulp and paper • Waste sludge • Paper mill wastes and liquors • Precipitated CaCO3 • Plaster • Bottom/fly ash, lime grinding • Dirty water
| • Pulp and paper • Oil and gas • Waste water treatment
|
• Ball mill discharge • Rod mill discharge • SAG mill discharge • Fine tailings • Flotation • Heavy media process • Minerals concentrate
• Mineral sands
| • Coal-washing plant • Coarse sand • Coarse tailings • Dredging • FGD • Wet crushers pplications • Wet scrubber systems
• Process chemical | • Iron and Steel • Ni acid slurry • Fracking slurries • Clay and sand slurries • Kaolin clay • Carbon slurry • Lime mud • Oil sands • Phosphoric acid |
Sometimes, it could also be used in dredging of settling lagoons and pumping of drilling mud etc.
4. Heavy duty Mining feed slurry pump hydrocyclone Materials
The AM(R) Mining Horizontal Centrifugal Slurry Pump is the heavy duty pump special designed for mining and mineral, power plant and general industrial department.
New development High Chrome Cast Iron make AM(R) Mining Horizontal Centrifugal Slurry Pump have the long time use-life. In some conditions, the new development Rubber materials have better performance when there is acid conditions. You could also find some rubber lined pump for your different required!
5.Heavy duty Mining feed slurry pump hydrocyclone Structure
6.Heavy duty Mining feed slurry pump hydrocyclone Atlas Curve
7. Heavy duty Mining feed slurry pump hydrocyclone Performance Data Sheet
8. Heavy duty Mining feed slurry pump hydrocyclone Size
An Pump Machinery Company to Customers:
1) Quality first. We guaranteed every part of the pump must be inspected closely
2) We can help you select suitable pump model according to your working condition and requirements.
3) We can design the related base or engine for your pumps.
4) Fast delivery time, large quantity of spare parts in stock.
An Pump Machinery Co. ,Ltd is your best pump manufacturer with 30+ years experienced
Our pumps export to over 90 countries all over the world in mining, power plant, dredging and dredge, hydraulic, irrigation, pulp transfer, chemical, construction, sea water and oil & gas transfer etc. click to more...
An Pump Machinery products slurry pumps, sewage pump, water pump, chemical pumps, fire pumps, irrigation pumps and other products exported to over 90 countries all over the world.
The application covers many fields, such as dredger, tailings transportation, mining, steel, desulphurization, boiler feed water, construction, irrigation, water conservancy facilities, sewage treatment.
24x7 service for your Heavy duty Mining feed slurry pump hydrocyclone:
Roger Chen
P: +86 311 899 40549
F: +86 311 862 71170
Wechat /whatsapp: +86 137 805 12387
Skype: chenroger1215
Web: www.angroupcn.com
Email: roger at angroupcn.com
Email: pump at angroupcn.com
(Please put "@" to "at" when you send the email)