The application of PE plastic pipe production line:
1) It can produce HDPE pipe from 20mm-1400mm. The pipes are usually used in the cable laying, water supply, etc.
2) It can also produce PPR pipe.
List of the PE plastic pipe production line:
NO. | Equipment |
1 | Automatic Feeder and Dryer |
2 | MSSJ Single Screw Extruder |
3 | MSSJ 25×25 Co-Extruder |
3 | Mould(including heater and calibrator) |
4 | Vacuum Tank |
5 | Cooling Tank |
6 | Haul-off unit |
7 | Cutting machine |
8 | Stacker |
9 | Spare Parts |
The auxiliary equipments are printer, chiller and so on.
Main parameter of PE plastic pipe production line:
Model | Screw diameter | L/D | Pipe diameter range(mm) | Main motor power (kw) | Total power(kw) | Line length (mm) |
PE-63 | 65mm | 33:1 | 16-63 | 37 | 80 | 24 |
PE-110 | 65mm | 33:1 | 75-110 | 55 | 110 | 30 |
PE-160 | 75mm | 33:1 | 90-160 | 90 | 150 | 32 |
PE-250 | 75mm | 33:1 | 110-250 | 110 | 200 | 42 |
PE-315 | 90mm | 33:1 | 160-315 | 160 | 240 | 44 |
PE-400 | 90mm | 33:1 | 200-400 | 185 | 300 | 50 |
PE-500 | 120mm | 33:1 | 250-500 | 280 | 350 | 56 |
PE-630 | 120mm | 33:1 | 315-630 | 280 | 480 | 56 |
The working process of PE plastic pipe production line:
Raw material+master batches → mixing → vacuum feeding → material dryer → single screw extruder ( small CO-extruder ) → calibrator → vacuum calibration tank → spray cooling water tank → printer → haul-off unit → cutting machine → stacker
Now PE plastic pipe production line is one of our leading products. we've obtained rich experience in design and manufacture of the whole extrusion lines.
If you have any questions, Pls feel free to contact us.
Our Service:
1) We recommend of machine and auxiliary equipment and relevant budgeting, human resources allocation and budgeting.
2) We provide you with free training so that you can use and maintain the machine independently.
3) We will answer customer's questions on technology in time. If needed, we will offer on-site guidance and assistance.