floating fish feed project line / sinking fish feed line / shrimp feed project / Automatic electrical control system / precise batching system / PLC electrical control
Flow Charting:
Raw Materials Receiving and Cleaning System-Mixing and Milling
System-Extrusion System-Drying System-Spraying System-Cooling
System-Packing System
Equipment List:
Raw Materials Receiving and Cleaning System(Optional)-Grinder and
Mixer-Extruder-Dryer-Sprayer-Cooler-Packing Machine
 
1. floating fish feed equipment ---grinding
The purpose of grinding is to reduce the raw materials into small particles. The particles sizes will be different with each type of material within the same grindings conditions.
A very small particles size is important for fish Feeds (0.5mm).
main equipment: hammer mill
advantage of hammer mill:
1. NSK bearing, material thickness is higher than feed industry 2mm.
2. water drop crushing room, full open operating door.
3. can meet coarse and fine crushing requirements.
 
2. floating fish feed equipment ---mixing
Blending consists to associate ground and proportioned raw materials, in order to distribute them homogeneously within the mixture.
main equipment: mixer
 
3. floating fish feed equipment ---extruding
extruding process is for floating fish feed. main equipment: extruder
advantage of extruder:
1. stainless steel frquency conversion feeder with speed-governing and arch-breaking.
2. with lengthening and forceful stainless steel conditioner.
3. combined main shaft.
 
4. floating fish feed equipment ---cooling

5. floating fish feed equipment --- sifting
 




If need mor information, please feel free to contact us


1. What's the capacity you want?
2. What's the raw material?
3. What's the size of the raw material?
4. What's the moisture content?
5. What's the final pellet size do you want?
6. Automatic packing or manual packing needed?
7. What's your country voltage?
 
 
1. Q: Are you a trading company or a manufacturer?
    A: We are a manufacturer, which has almost 10 years of experience in this industry.
2. Q: How can I get to your company?
    A: You can get a flight to Nanjing Airport. We are just about 40-50mins away from Nanjing Airport.
3. Q: How long is your guarantee?
    A: One Year (Calculated from the equipment arrives the customer's side.). After this period we will definitely still support you when needed. You will be welcome to contact us with any problem might experience.
4. Q: Will you send engineers to install the plant?
    A: yes, but at an extra cost payable by the customer. Or you can get local contractors to do the commissioning and we send one supervising engineer.