GSD-L12 Lead Free Reflow Oven control by computer+ PLC,24 heating zones, 2 cooling zones
Features:
1......... Windows operating interface is adopted and two control methods,including PC control and emergency manual control, are designed to ensure the safety of the device.
2...........The advanced way of heating solves the problem of the dead angle that may arise when reflow soldering.
3............Professional wind wheel design with stable blowing speed which effectively avoids evenness of the wind when PCB is being heated.so as to achieve a most efficient reheating.
4.......Regions of different temperature adopt the circulation independent from each other,with independent PID control and up/down heating method method,so as to ensure the accurate and even temperature of the furnace and large thermal capacity.
5......... The heating preservation layer adopts quality aluminum silicate heat preserving material,with good preservation effect and high heatingup speed.It takes 20minto heat up working temperature from room temperature.
6....... Quality hightemperature highspeed motor is running stably with light vibration and low noise
7........The furnace is jacked by cylinder and supported by safety rod to ensure safety and convenience.
8.........The PCB is conveyed nonlevel with changed frequency and speed and synchronous grid and chain to ensure great stability.
9............. Special quality aluminum alloy guide rail is adopted and auto fuel feeding system ensures the debugging accuracy of the guild rail as well as its use life.
10.............UPS function is equipped to ensure normal output of PCB after power break and avoid damage
11............The software has powerful function.It can measure the temperature of the PCB online and can analyze ,save and print the data and curve from time to time.
12..............PC and PLC adopts PC/PP protocol to communication with each other which ensures stable working and avoids system down.Auto detecting and showing working status of the device.
13.............Enforced air cooling ;PCB temperature≤60ºC.
14..............Special furnace liner design ,with good heat preservation ability and low power consumption.
| ITEMS | SPECIFICATIONS |
| Control system | PC+PLC |
| Heating/cooling | 24heating zone 2 cooling zone |
| Heating zone length | 4350mm |
| Temperature range | Room temperature-350 centigrade |
| Temperature accuracy | ±1 centigrade |
| Three temperature | ±2 centigrade |
| Cooling | Forced cooling (patent cooling system) |
| PCB size | 50(W)-400mm(W) |
| A high degree of PCB transfer | 900±20mm |
| Transmission | Chain&belt |
| Transmission direction | L→R |
| Transmission speed | 0-2000mm/min adjustable |
| Wide range of track notes | 50-420mm |
| Net width | 500mm |
| Power failure protection | UPS |
| Power supply | A3/380V 50HZ |
| Normal working power/total power consumption | 14/88KW |
| Dimensions(l*w*h) | 6880mm(L)*1500mm(W)*1550mm(H) |
| Weight | 2800KG |
China
