Company Information :
Shanghai Monarch Power Engineering Limited has already established very close relationships with Cummins, Deutz, Isuzu, Lovol, , Iveco, Nissan, Toyota and other manufacturers. We can also provide you with the complete series of engines with the brands above. The engines are used for marine propulsion, marine generators, industrial generators, construction engines, vehicle engines, agriculture engines, etc.
We has already established cooperation relationships with customers all over the world, with an experienced and professional staff group, as well as senior engineers, technicians and salesmen. Now our company is known as a leading manufacturer in supplying of diesel generators (for both industrial use and marine use).
We can provide you with generators which are approved by China Classification Society CCS. Our marine generator can be approved by CCS, ABS, BV, DNV, GL, LR, GL, RS, etc. With steady quality, quick and professional service, our company gains the general recognition from users at home and abroad.
We are sincerely looking forward to establishing business relationships with you for our mutual benefit.
Specifical Specifications :
Detailed photos of our products :
Our Service :
Shanghai Monarch Power Engineering Limited has already established very close relationships with Cummins, Deutz, Isuzu, Lovol, , Iveco, Nissan, Toyota and other manufacturers. We can also provide you with the complete series of engines with the brands above. The engines are used for marine propulsion, marine generators, industrial generators, construction engines, vehicle engines, agriculture engines, etc.
We has already established cooperation relationships with customers all over the world, with an experienced and professional staff group, as well as senior engineers, technicians and salesmen. Now our company is known as a leading manufacturer in supplying of diesel generators (for both industrial use and marine use).
We can provide you with generators which are approved by China Classification Society CCS. Our marine generator can be approved by CCS, ABS, BV, DNV, GL, LR, GL, RS, etc. With steady quality, quick and professional service, our company gains the general recognition from users at home and abroad.
We are sincerely looking forward to establishing business relationships with you for our mutual benefit.
Specifical Specifications :
Engine of CUMMINS EG600 Natural Gas Generator Set | |
| Engine Model | CUMMINS K38 |
| Type | 12 cylinders V type |
| Bore * Stroke (mm) | 159*159 |
| Displacement(L) | 37.8 |
| Compression ratio | 9.3:1 |
| Rated speed(rpm) | 1500/1800 |
| Inlet type | Exhaust Turbocharger/Air-Air Intercooler |
| Cooling type | Cooling water tank |
| Fuel System | Low and high pressure |
| ESC Type | Special for U.S. GAC natural gas |
| Ignition sequence | 1R-6L-5R-2L-3R-4L-6R-1L-2R-5L-4R-3L |
| The allowed maximum speed (Natural gas supply closed at this time) | 2160 rpm |
| The allowed maximum rotating speed (The ignition system shut down at this time) | 2160 rpm |
| Oil Capacity | 135 L |
| Cooling water capacity | 290 L |
| Maximum engine back pressure | 10.2 kpa |
| Gas consumption(m3kw·h) | <0.3 |
| Rough oil consumption(g/kWh) | <1.6 |
| Radiator and oil cooler heat | 200KW |
| Exhaust pipe heat radiation | 228KW |
| Engine thermal radiation | 30KW |
| Alternator thermal radiation | 12KW |
| Cooling water temperature | 95 Deg C |
| Oil temperature | <120 Deg C |
| Exhaust pipe heat energy (above 120 º C section) | 585KW |
| Exhaust temperature (before vortex ) | 660±15 Deg C |
| Exhaust Flow | 6000 m³/h |
| Fan exhaust flow | 15 m³/s |
| Noise level from 1 m | less than 100 db(A) |
Alternator of CUMMINS EG600 Natural Gas Generator Set | |
| Alternator Model | Engga EG355L-600N |
| Excitation Method | Brushless Permanent Magnet |
| Winding pitch | 2/3 pitch |
| Number of poles | 4 |
| Bearing number | 1 |
| Stator Windings | 6 ends |
| Insulation Class | H class |
| Protection class | IP 21 or IP 23 |
| Load type | Continuous operation |
| AVR Model | WT-2 |
| Alignment | Fly wheel |
| Temperature Range | Less than 125 degrees Celsius |
| Overload Capacity- the percentage of rated power | 110% |
| Waveform distortion rate, no-load | <5% |
| Voltage Regulation Mode | AVR |
| Voltage Regulation Range | ±5% |
| Steady State Voltage Regulation | ±1% |
| No-load line voltage sine wave distortion | <2% |
| Telephone interference factor (TIF) | < 50 |
CUMMINS EG600 Natural Gas Generator Set | |
| Rated Output(KW) | 600 |
| Standby Output(KW) | 660 |
| Voltage(V) | 400 |
| Current(A) | 1080 |
| Size(mm) | 4400*1700*2310 |
| Approximate weight(KG) | 8400 |
| Emission levels (Nox) | Euro II emission(mg/m³) |
| Naturally aspirated engine intake air temperature | Not more than 45 Deg C |
| Air temperature before entering the air to air intercooler | 82- 87(Deg C) |
| Air temperature after entering the air to air intercooler | 40-55(Deg C) |
| Rated Power @ 0.8 power factor (w / pump s and w / o fan) | 600KW (continuous operation) |
| Total energy input (100% load) | 1657(KW) |
| Electrical efficiency | 36.20% |
| Thermal efficiency | 87.90% |
| Control panel(Deepsea or others) | Synchronizing Control, Multilingual Mode Digital Control, Diagnostic Function, Direct Text Indicate of Faults, MOBUS Communication Protocol, Compatible Communication, Exchange Telecommunications, Wired Control Data Output, Automatic or manual start |
Detailed photos of our products :
Our Service :
Why choose us?
Advantages we have :
A. Experienced engine, marine engine,diesel engine, generator, generator set supplier;
B. Professional technical team and sales department for your service;
C. Our products recognized by CCS, IMO Certificate;
D. All the questions will be dealed within 24 hours;
Benefits you get :
A. Stable quality
B. Competitive price
C. Satisfactory service before and after sale
China