Biomass gasification process includes three steps:
Step 1: biomass gasification, which convert biomass into syngas.
Step 2: gas purification, the gas produced contains contaminants including dust, coke, tar and etc., the purification system is used to remove the contaminants and ensure normal operation of gas engine.
Step 3: electricity generation, clean gas enter into gas engine to generate electricity.
The high temperature exhaust gas may be reused by waste heat boiler to generate steam or hot water for civil or industrial use). Steam turbine may also be considered to make a gas-steam combined cycle power plant, which will increase the total efficiency.
Advantages of biomass generator sets from Sinodec
Mature and stable technology
International quality system certification
various models
Low noise vibration
Technical Parameter of 100KW Gas Generator Set
Requirements for biomass gas
Our Service
Quality Warranty
12 months or 1000 hours(subjected to the earlier one) quality warranty from the day the client get the machine.During the warranty,the problems caused by quality defects will be born by the company.Life-long service including maintenance and repair after the warranty,only charged at cost.
24 hours service line:+86-13176658955
About Us
SINODEC is a renewable energy solutions provider, leading gas gensets manufacturer, EPC/BOT Contractor, who provide Power Generation System and Financing Service for the world. Company bases are located in China's most famous manufacturing city --- Jinan, Shandong Province. Thanks to the region's power generation equipment and highly concentrated petroleum machinery technical information, a wealth of manufacturing and technical personnel and mature manufacturing supporting environment for our production and development of China's most cost-effective power generation products give us a unique technical support.
Should you have any question,please feel free to contact us.
Sinodec landline:+86-53186266632
Step 1: biomass gasification, which convert biomass into syngas.
Step 2: gas purification, the gas produced contains contaminants including dust, coke, tar and etc., the purification system is used to remove the contaminants and ensure normal operation of gas engine.
Step 3: electricity generation, clean gas enter into gas engine to generate electricity.
The high temperature exhaust gas may be reused by waste heat boiler to generate steam or hot water for civil or industrial use). Steam turbine may also be considered to make a gas-steam combined cycle power plant, which will increase the total efficiency.
Advantages of biomass generator sets from Sinodec
Mature and stable technology
International quality system certification
various models
Low noise vibration
Technical Parameter of 100KW Gas Generator Set
| Generator Set | Type | 100GF-S |
| ekW | 100 | |
| ηel(%) | 38 | |
| LxWxH(mm) | 5506x1970x2675 | |
| Weight(kg) | 12500 | |
| Engine | Type | JG12V190ZKDK-2 |
| BorexStock(mm) | 190x210 | |
| Displacement(L) | 8.3 | |
| Speed (rpm) | 1000/1500(50Hz) | |
| Speed (rpm) | 1200/1800(60Hz) | |
| Starting Mode | 24V DC Electric starting system | |
| Cooling Type | Vertical fan water tank/heat exchanger/multiple fan water tank | |
| Governing Type | Electronic governor | |
| Alternator | Type | 1FC6 455-6 |
| Rated Voltage (V) | 400/230 | |
| Current (A) | 902 | |
| Power Factor | 0.8(Lagging) | |
| Phase and Connection | 3 phases 4 wire, Y-connection | |
| Excitation | Brushless | |
| V-regulator | Automatic | |
| Control Panel | Feature | Powered by 24 volts DC , degree of protection IP54, lockable hinged door, start/stop control switch, Voltage adjustment |
| Data View | RPM, operating hours, total generating capacity, oil pressure, coolant temperature, DC voltage, Hz,ekW, frequency , voltage ,pf, exhaust temperature, Engine cylinder temperature,Speed | |
| Protection Function | Low oil pressure; high coolant temperature; high oil temperature, overspeed, emergency stop, under/over voltage, under/over frequency, overcurrent reverse power, | |
| Spare | Spare indicator LEDs, spare alarm/shutdown inputs |
Requirements for biomass gas
| No. | Gas component | Range |
| 1 | Temerature | ≤40° |
| 2 | Pressure | 3kpa-10kpa |
| 3 | Pressure variation rate | ≤1kpa/min |
| 4 | H2S content | ≤20mg/Nm3 |
| 5 | NH3 content | ≤20mg/Nm3 |
| 6 | Tar content | ≤20mg/Nm3 |
| 7 | Impurity size | ≤5μm |
| 8 | Impurity content | ≤30mg/Nm3 |
| 9 | Moisture content | ≤40mg/Nm3 |
Quality Warranty
12 months or 1000 hours(subjected to the earlier one) quality warranty from the day the client get the machine.During the warranty,the problems caused by quality defects will be born by the company.Life-long service including maintenance and repair after the warranty,only charged at cost.
24 hours service line:+86-13176658955
About Us
SINODEC is a renewable energy solutions provider, leading gas gensets manufacturer, EPC/BOT Contractor, who provide Power Generation System and Financing Service for the world. Company bases are located in China's most famous manufacturing city --- Jinan, Shandong Province. Thanks to the region's power generation equipment and highly concentrated petroleum machinery technical information, a wealth of manufacturing and technical personnel and mature manufacturing supporting environment for our production and development of China's most cost-effective power generation products give us a unique technical support.
Should you have any question,please feel free to contact us.
Sinodec landline:+86-53186266632
China