Anti-corrosion Filter Press Feed Mining Equipment in China
Product Introduction:
MA series slurry pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general industry applications. The horizontal slurry pumps are designed for heavy duty applications such as mill discharge, power sector and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density slurry.
Product Features:
-Wear resistant metal or rubber wet end parts, long service life
-Wide options for impeller
-Various types of pump seals to suit different working condition
-Grease or oil lubrication
-Discharge branch can be positioned at intervals of 45 degree
-Can be installed in multistage series
-Easy to maintain
Application Range:
Size: 25 mm to 450 mm
Capacity: up to 5000 m3/hr
Maximum Heads: up to 75 m
Product Introduction:
MA series slurry pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general industry applications. The horizontal slurry pumps are designed for heavy duty applications such as mill discharge, power sector and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density slurry.
Product Features:
-Wear resistant metal or rubber wet end parts, long service life
-Wide options for impeller
-Various types of pump seals to suit different working condition
-Grease or oil lubrication
-Discharge branch can be positioned at intervals of 45 degree
-Can be installed in multistage series
-Easy to maintain
Application Range:
Size: 25 mm to 450 mm
Capacity: up to 5000 m3/hr
Maximum Heads: up to 75 m
| Pump Type | Pump Model | Size | Flow | Head | Application | Feature |
| MA/MAR Heavy Duty Slurry Pump | 1.5/1B-MA | 1"-18" | 4-5400 m3/h | 5-75m | -Ball Mill Discharge | -Wear resistant metal or rubber wet end parts, long service life |
| 2/1.5B-MA | -SAG Mill Discharge | |||||
| 3/2C-MA | -Rod Mill Discharge | |||||
| 4/3C-MA | -Coal Washing | -Wide options for impeller | ||||
| 4/3D-MA | -Coarse Sand | -Various types of pump seals to suit different working condition | ||||
| 6/4D-MA | -Coarse Tailing | |||||
| 6/4E-MA | -FGD | -Grease or oil lubrication | ||||
| 8/6E-MA | -Fine Tailing | -Discharge branch can be positioned at intervals of 45 degree | ||||
| 8/6F-MA | -Flotation | |||||
| 10/8F-MA | -Heavy Media | -Can be installed in multistage series | ||||
| 10/8ST-MA | -Mineral Processing | -Easy to maintain | ||||
| 10/8G-MA | -Mineral Concentrate | |||||
| 12/10F-MA | -Pulp and Paper | |||||
| 12/10ST-MA | -Process Chemical | |||||
| 12/10G-MA | -Oil Sand | |||||
| 14/12F-MA | -Mineral Sand | |||||
| 14/12ST-MA | -Pulp and Paper | |||||
| 14/10G-MA | ||||||
| 16/14TU-MA | ||||||
| 20/18TU-MA |
China
