Product Profile

 For a long time laboratory traditional Chinese medicine (herbal) natural product extraction and juice spray drying have been a difficult problem for scientific research personnel. Upon laboratory traditional Chinese medicine (herbal) natural product extraction and juice spray drying, materials immediately melt when spray dried as they have a lot of carbohydrate compositions which are easy to melt at high temperature and they form sticky candy like substances on drying chamber wall of traditional spray dryer. As a result, scientific research personnel can not get desirable powder with good liquidity. Sometimes a lot of auxiliary materials are added in order to get the powder, such as starch or cyclodextrine, but no satisfactory effect has been achieved.

Product Description

 YC-1800 laboratory low-temperature spray dryer is a breakthrough made by Shanghai Pilotech Instrument & Equipment Co., Ltd with efforts in spray drying technology. YC-1800 can extract natural product and juice from traditional Chinese medicine (Chinese herbal medicine) in laboratory and get powder particles of excellent liquidity at a low temperature of 110°C with a high yield. In particular, it achieves rapid material drying at low temperature and provides very convenient and safe drying method for thermo-sensitive materials, such as biological product, high carbohydrate traditional Chinese medicine natural product extract, thermolabile polymer material, heat gasification material and so on.

Features

 1)Spray dry at low temperature (110ºC) using for thermosensitive material.

2)7" high-resolution LCD, human-oriented interface, Chinese and English menu, Optimize operation procedure, efficiency, flexibility, easy-going and easy learning.

3)Patrticle size with normal distribution.

4)Two fluid atomizing structure, made of SUS 304(316 optional)Stainless steel. Easy operating.

5)To assure accurate temperature control and easy parameter adjusting, YC-1800 applies PID.

6)The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber to avoid secondary pollution.

Parameters

1,Two fluid atomizing structure, made of SUS 304(316 optional)Stainless steel. 

2,Evaporation rate of water at inlet temperature of 110ºC using Standard:Approximately 1000 ml~ 1800ml/hour.

3,Min sample:50ml. 

4,To assure accurate temperature control and easy parameter adjusting, YC-1800 applies PID. 

5,standard with 0.7 mm jet and other sizes are available as accessories. 

6,Power: 4KW/380V.

7,Spray dry at low temperature (105ºC) using for thermosensitive material.

8,7" high-resolution touch screen LCD.