Vacuum Belt Conveyor Vacuum Belt Filter
 
Description:
DU rubber vacuum belt filter press is a high efficient solid-liquid separation device absorbed advanced technology at home and abroad. It has a fixed vacuum box where tape slides on to form a sealing structure and solid-liquid is separated under vacuum sub pressure. Filter area is able to auto-filter, wash cake, discharge sludge, regenerate cloth and collect mother liquor and washing liquor in section.
It features high efficiency, large productivity, low water-content of cake, simple operation and easy maintenance. After years of improvement, its technology achieved the international advanced level and is widely used in solid-liquid separation for metallurgy, mining, chemical engineering, paper mill, food, pharmaceutical, coal washing, environmental protection industries, especially for calcium sulfate dewatering in FGD.
 
 
Features

1. Modularized design is for easy installation and transportation.
2. High auto degrees: Consecutive auto feeding, filtering, washing, dewatering, discharging, cloth cleaning improves production efficiency.
3. Fast filter speed: large particles will settle at the lower layer while small particles upper layer when material goes through sedimentation area. Reasonable structure of filter cake ensures low resistance of liquid for fast filter of thin layer.
4. Convenient filter technology: cake thickness, water vol., counter current decantation stages, vacuum degree, filter speed can be adjusted for optimistic effect.
5. Fine decantation effect: even and thorough multi-stage advection or counter current decantation makes collection and reuse of mother liquor and washing liquor separately.
6. DSC for control system ensures site control and remote control automatically.
 
 
Flow Process Diagram
 
 
A. Feeding device B. Spraying device   C. Adjusting device
 
D. Washing device   E. Air-liquid separator F. Reflux pump  
 
G. Vacuum pump   H. Rubber belt   I. Filter cloth   J. Vacuum box
 
K. Friction belt
 
 
Vacuum Box and Lifting Device
Vacuum box is connected by section as a whole and each section is connected with liquid collection pipe to form a vacuum liquid collection system. There is also a lifting device for easy change of friction belt.
 
 
                                                                      
Adjusting Device and Tightening Device
Auto-adjustment of cloth by cylinder or gasbag is used for normal operation.
Tightening device works through screws for sufficient friction to avoid deviation.
 
Washing Device
Water jet for cloth and belt washing and sealed vacuum box for site cleaning, head is from US spraying system Co. for better performance.
Counter current type and shower device offers two choices as advection or counter current decantation for different materials so as to wash completely.
 
 
 
Control System
Remote and field control is convenient for unattended operation.
 
 
 
Sideway of Belt and Shutter 
Four-layer EP200 polyester fabric for loop rubber band and composite structure for sideway, that is, wave sideway is connected with parallel tape ensures elasticity so as to avoid fraction of sideway and outflow of liquor when it goes through the roller. At the top of rubber band is a row of groove with vacuum discharging hole on it, pure rubber layer for discharging hole part can prevent liquid flows into rubber tape through cloth thus greatly improves its life time.  
 
 
 
Technical parameter
 
 
 
 
 
 
 
 
Company Information
 Shandong Better Enviromental Protection Technology Co., Ltd, 
is the largest enviromental protection machinery manufacture in Shandong province,
with over 10 years experience and hard work of our emplyees,
we won the National Patents for our machines and customers all over the world.
 
 
FAQ
 
1.Q:Are you a factory or trading company
A: We are a factory, we have rich experience for manufacuring water processing equipment for more than 10 years.
 
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.3388 Zhencheng Road, Huangtu Town, Jiangyin City, Jiangsu Province,China. It is about 2 hours from Shanghai airport. We can pick you up if you need, welcome to visit our factory.
 
3.Q: Do you have  minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
 
4.Q: Do you have  certificates?
A: Yes, we have ISO,SGS certificate.
 
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q:How to buy your idea products?
  A:You can provide us your water sources, water quality, flow rate and ground area (connect us for more details).
7. Q:How to pay?
  A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
8. Q:What is the delivery time?
  A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
9. Q: How to pack the products?
  A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How to keep your equipments from corrosion? 
A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment ?
  A:Our  machining technology  includes laser/plasma cutting, automatic welding,CNC cutting and bending.
 
12. Q:How to install after the equipments arriving destination? 
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.