So far, this product is the most commonly used ordinary agitator tank, the impeller is located at the lower part of the circulating cylinder, the pulp and the medicament are added into the circulating cylinder to stirring. The company through the experiment, the design of the new impeller is different from the original type, high stirring efficiency. According to user needs to produce rubber impeller, nylon impeller and other products, ordering need to specify. According to user requirements to set the relative location of the motor, feeding port and discharge port , relevant parts are usually installed on site. RJ agitator can be divided into cone bottom and flat bottom, cone bottom type need to specify.
Products Show
Technical parameters
Working Principle
Mixed Stirring Barrels for a variety of metal ores, mainly for pre-mixing flotation, are pharmaceutical products, with the well-mixed slurry can also be used for other non-metallic mineral mixing. It is used in concentrations of not more than 30% (by weight) a fixed component of the particle size is less than 1mm. It is a flat-bottomed bucket of radiation in the form of circular screw-type impeller mechanical agitation.Triangle by the electric motor rotating impeller rotation, will be full of drugs and pulp mixture to increase the role of the mineral reactions pharmaceutical and strengthen drug reactions necessary equipment.
Feature of Agitator
1.High efficiency and low power consumption. |
2.Easy maintenance and reliable operation. |
3.High circulating ability and strong agitating capacity. |
4.Uniquely designed impeller, uniform agitation. |
5.Excellent mixing result. |