The characteristics of pneumatic diaphragm pump products
1, do not need irrigation water diversion, up to 5 meters, suction lift up to 70 meters, the outlet pressure >= 0.8 Mpa
2, flow and spacious, with good performance, the allowed maximum particle diameter by 10 mm.When pumping mud, impurities, the pump wear little;
3, head and flow rate can be adjusted by the valve opening (pressure adjusting between 1-7 bar)
4, the pump no rotating parts and no shaft seal, diaphragm, such as the movement of the pump and pumping medium components, workpiece medium completely separated, the conveying medium will not leak out.So when pumping toxic, volatile or corrosive medium, not cause environmental pollution and harm the personal safety;
5, don't have to use electricity, use safe and reliable in inflammable and explosive places
6, work can be immersed in the media
7, easy to use, reliable operation, stop by simply opening and closing the gas valve, even if long time no medium due to unexpected run or suddenly stop the pump will not be damaged because of this, once the overload, the pump will automatically stop, self protection performance, when the load is back to normal after, can run automatically start again;
8, simple structure, less wearing parts, the pump has simple structure, convenient installation, maintenance, pump will not come into contact with the medium of high-pressure air, link and other moving parts, unlike other types of pumps for rotor, piston, gear, blade and other parts of wear and make the performance decline gradually;
9, may transport the sticky liquid under 10000 centipoise (viscosity);
10, this pump without oil lubrication, even if the idling, is without any effect on the pump, this is the pump a feature;
Pneumatic diaphragm pump applications
1, the pump suction paints, rubber, paint.
2, glue and glue, all kinds of available drain pump.
3, pumped peanut butter, pickles, mashed potatoes, apple pulp small sausage, fruit jam, chocolate, etc.
4, all kinds of tiles, porcelain, tiles, and pottery glaze slurry.
5, oil drilling, pump suction sediments and grouting.
6, various emulsion pump suction and packing.
7, pumped all kinds of wastewater.
8, pump for oil tankers, barges clearance drain sewage in warehouse.
9, hops and yeast slurry, syrup, sugar.
10, pumped mine, tunnel, tunnel, ore dressing, slag in water.Pumped cement grout and mortar.
11, all kinds of rubber slurry.
12, all kinds of abrasive, corrosion inhibitor, oil and mud, cleaning oil dirties and general container.
13, all kinds of highly toxic, flammable, volatile liquid.
14, all kinds of strong acid, strong alkali, strong corrosive liquid.
15, all kinds of high temperature liquid up to 150 ºC.
1, do not need irrigation water diversion, up to 5 meters, suction lift up to 70 meters, the outlet pressure >= 0.8 Mpa
2, flow and spacious, with good performance, the allowed maximum particle diameter by 10 mm.When pumping mud, impurities, the pump wear little;
3, head and flow rate can be adjusted by the valve opening (pressure adjusting between 1-7 bar)
4, the pump no rotating parts and no shaft seal, diaphragm, such as the movement of the pump and pumping medium components, workpiece medium completely separated, the conveying medium will not leak out.So when pumping toxic, volatile or corrosive medium, not cause environmental pollution and harm the personal safety;
5, don't have to use electricity, use safe and reliable in inflammable and explosive places
6, work can be immersed in the media
7, easy to use, reliable operation, stop by simply opening and closing the gas valve, even if long time no medium due to unexpected run or suddenly stop the pump will not be damaged because of this, once the overload, the pump will automatically stop, self protection performance, when the load is back to normal after, can run automatically start again;
8, simple structure, less wearing parts, the pump has simple structure, convenient installation, maintenance, pump will not come into contact with the medium of high-pressure air, link and other moving parts, unlike other types of pumps for rotor, piston, gear, blade and other parts of wear and make the performance decline gradually;
9, may transport the sticky liquid under 10000 centipoise (viscosity);
10, this pump without oil lubrication, even if the idling, is without any effect on the pump, this is the pump a feature;
Pneumatic diaphragm pump applications
1, the pump suction paints, rubber, paint.
2, glue and glue, all kinds of available drain pump.
3, pumped peanut butter, pickles, mashed potatoes, apple pulp small sausage, fruit jam, chocolate, etc.
4, all kinds of tiles, porcelain, tiles, and pottery glaze slurry.
5, oil drilling, pump suction sediments and grouting.
6, various emulsion pump suction and packing.
7, pumped all kinds of wastewater.
8, pump for oil tankers, barges clearance drain sewage in warehouse.
9, hops and yeast slurry, syrup, sugar.
10, pumped mine, tunnel, tunnel, ore dressing, slag in water.Pumped cement grout and mortar.
11, all kinds of rubber slurry.
12, all kinds of abrasive, corrosion inhibitor, oil and mud, cleaning oil dirties and general container.
13, all kinds of highly toxic, flammable, volatile liquid.
14, all kinds of strong acid, strong alkali, strong corrosive liquid.
15, all kinds of high temperature liquid up to 150 ºC.
China