Standard Design:
The AMZ pump with its conventinal lobe pump design concept has a robust cast iron gearbox, which provides maximum shaft rigidity and easy oil seal replacement. The AMZ range has a universal gearbox design. This gives the flexibility of mounting pumps with the inlet and outlet ports in either a vertical or orizontal plane by changing the foot position.
A quality epoxy paint system is used on the gearbox exterior for optimum protection against natural and corrosive elements.

The AMZ in standard specification has sanitary design full bore inlet and outlet ports to international standards, maximising inlet and outlet port efficiency and NPSH characteristics. Enlarged diameter and rectangular ports are also available to handle very high viscosity products.

The AMZ in standard specification has tri-lobe rotors with the option of bi-lobe rotors for handing fluids containing large delicate solids. All rotors are available in three temperature ratings allowing the pump to be operated at maximum process temperatures of 70 degree, 130 degree and 200 degree for both fluid pumped and CIP.

Applications
Dairy: milk, cream, curds, butter, soft cheese, yogurt, butter, margarine, ice cream.
Bakery: yeast, dough, fruit filling, icing, fats and oilds
Meats: sausage filling, fats, broths, gelatins, pet food
Canned Foods: potato salad, baby food, soups stews, tomatoes, relishes, pudding, dreesings, mayonnaise, jams and jellies.
Beverages: beer, mash, wort, fruit juices, fruit concentrate.
Candy: sugars, chocolate, cocoa butter, corn syrup, gelatin.
Flavorings: syrups and concentrates.
Dressings: mayonnaise and other prepared sauces
Cosmetics: creams, lotions, jellies, shampoos, emulsions, toothpaste,
industrial: automotive paints, inks, latex, polymers.


Materials of Construction:
pump gearbox-high quality grey cast iron.
pumphead-product wetted components in 316L
product wetted elastomers of EPDM, NBR, FPM and FDA.
confoming also PTFE for chemical applications

Shaft Seal Options:
Singleor single flush/quench ( steam barrier for aseptic application) type mechanical seals.
Double type mechanical seal for flush.

Standard Specification Options :
Specification of inlet and outlet ports ( screwed male to BSP, DIN11851, Rdg, SMS, ISS/DF, RJT, IAMD/3A, Tri-clamp and other standards, or flanged to BS4504/DIN2533, ASA/ANSI 150, BS10E and other standards)
Rotorcase cover with integral pressure relief valve.
Heating/cooling saddle jackets for rotorcase and jacket for rotorcase cover ( not available when relief valve fitted )
Bi-lobe rotors in stainless steel and non-galling alloy
Electropolished product wetted components
Complete pump unit comprising: pump + baseplate (mild for stainless steel) + coupling with guard + geared electric motor suitable for ( or supplied with) frequency speed control or manual variable speed drive ( advise motor enclosure and electrical supply)

Materials for mechanical seals :
carbon/stainless steel, tungsten carbide/tungsten carbide
Silicon carbide/silicon carbide or variations of these materials to suit fluid pumped and / or application requirements.

Pump Sizing :
in order to correctly size a rotary lobe pump some essential information is required. provision of this information listed below enables our customer support personnel to obtain the optimum pump selection.

Product/Fluid Data :
Fluid to be pumped
viscosity
SG/density
Pumping temperature, minimum, normal and maximum
cleaning in place temperature, minimum, nomal and maximum

Performance Data :
Flow rate, minimum, nomal and maximum
discharge head/pressure (closest to pump outlet)
suction condition

Connection with Reducer :
WR series helical gear ( fixed ratio)
WR series helical gear with frequency conversion motor
MBN series manual variable speed drive


Any question, be free to contact us, we are professional manufacturer for this field for more than 10 years. We will reply you within 24 hours. We are here waiting for your Sincere cooperation.

We have been a professional manufacturer and sales for high precision sanitary valves, pipe fittings, pipe connecting fittings, precise forging, forged valve and OEM forging parts ect. Which use for food, beverage, pharmacy, biology engineering, water treatment cosmetic, petroleum and chemical industry area, etc. Its advantages are with forging, heat treatment and machining.

We have many many testing equipemnts and instruments. Which are dimensional measuring machine, spectroscopic analysis equipment, hardness equipment, optical instrument etc.

We have the best team of experts in the management and technology. We design and produce our products as BPE, DIN, SMS, 3A, IDF, RJT, ISO and BS etc stanrard strictly. We test each step from raw-material to finished products. They avouch us to control the material quality, and finished products quality.

So far quality controls systems ISO9001 and Safety "CE" certification, and SGS had gotten through.