potato slanty pellets snacks making machine

1.Brief Introduction of pasta processing machine:
  Adopts potato starch, corn starch, cassava starch, wheat flour, corn flour etc as raw materials This line can be used to produce different shapes of pellets by adjusting the moulds from extruder. All the machines are made by stainless steel, this line is with reasonable design and with high automation; the screws are made by alloy steel, with building block system structure and self-cleaning function
1) You can get various shapes of pasta such tube, shell etc.
2)We have basic formula of pasta for your reference.
3) The machines performance and products quality reach to the most advanced level in the world.
4) High efficiency, low consumption, easy to operate and maintain.

2.Main Flow chart for pasta processing machine: 
Mixing→ Conveyance→ Extrusion→ Cut off→ Conveyance→ Drying→Cooling-Packing

3. Voltage in China: Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to customers' Local voltage according to different countries

4. Machines materials: All the machines are made by stainless steel to prolong the service life.

5.Specification of the pasta processing machine

6. Equipments material
Equipments are made of stainless steel and the screw is made of alloy steel and special craft, which guarantee the using time longer.
 

7. Machine advantage and feature:

1. The screw is made of alloy (38CrMoAL) by nitriding process, high strength and wear-resting. And it has good self-cleaning ability and does not need to discharge or clean the barrel and screw, when roasting or replacing of materials; Segmental screw is applied to more kinds of materials and production. At the same time, it is easy to change and reduce the replacement cost.

2. It adopts speed-adjusted converter on feeding system, extrusion system and cutting system which could adjust the speed with more powerful drive, stable running, and low consumption.

3. Automatic lubrication system in gear box, it could reduce power consumption and prolong the life.

4. Radiator is increased on driving part for forced cooling effect, and it ensures extruder operate safely.

5. Barrel with water-cooled circulation, raw materials not only for corn/rice, also for wheat flour/starch with high viscosity. Different moisture-extrusion temperature ratio, whole-expanded and half expanded as different type of products.

6. Hanging mould and knife steat can increase the speed of replacing mould and knife.
 
8. Satisfied service & Turnkey Solution: