JR-GD1 series control cabinet

Features

1. The frame of the cabinet is made of C-shaped profile or folded with 2.5mm thick cold-rolled steel plate. The structure is firm, the load is large, and the dispersion tension is strong.

2. The size of the GD1 series and the PS series can be matched with each other, parts and accessories are versatile and can be quickly installed. The appearance of the GD1 cabinet can be made in the same style as the PS cabinet.

3. Front door can be single, double open, 25mm above the ground hidden door hinge, easy to install, easy to replace, the door can be opened at 130 degrees, can also be changed to 180 degrees, the door mounted every 25mm drill a rectangular box, you can reinforce Door panel, easy to install.

4. The rear wall plate is installed with screw fasteners, and the rear wall plate can be replaced with a door plate

5. The mounting plate uses a slide rail to adjust the depth every 25mm.

6. Doors, cabinets, rear wall panels, and mounting boards all have safe and reliable grounding connections.

7. At the bottom, there are three parts of replaceable special wire seals, which can be removed and drilled.

8. Easy to install and remove the base (optional).

9. Surface treatment: oil, phosphating, electrophoretic primer, spray outdoor waterproof plastic powder.

10. International quality replaceable accessories

11. Body color: RAL7032, RAL7035 (can be dusted according to the user's color); mounting plate: red and yellow or galvanized.

12. Material: Cold rolled steel plate or stainless steel: door 2.0mm, box 1.5mm, mounting plate 2.5mm.

13. Various specifications and opening changes can be customized according to customer requirements.

14. According to customer requirements increase the threshold, the color is optional.

15. Used in PLC, DCS low voltage switch, relay instrument and light load transmission cabinet.