Product Instructions

1.Before use,first check whether  the power supply corresponds to that required by the machine.check if the external ground wire is reliable connection.(Warning:Electrical outlet must be grounded.)

2.You must check that the new machine rotates in the direction indicated by the rotation mark,if not,get it right.

3.Please clean and soak the rice or bean into water for four hours.

4.Please put water into the bucket.then open the tap and turn on the machine.

5.Loosen the nut-locker,rotate the hand wheel slowly,adjust the clearance between the grinding wheels until the grinding wheels contact each other slightly.Then rorate the nut-locker lightly.

6.Feed the rice or bean into the funnel,open the feeding lock slowly.When the pilp flow out from the outlet normally.you could adjust the water discharge to control the thickness of the pulp.

 Maitenance

 1.Every few days,please add a few drops of cooking oil  to the door-ear,the bolt and the bearings to prevent rusted.

 2.After use,should be clean and dry the machine in time,open the machine cover to keep well ventilating to ensure hygiene.

2,We usually ship within 25 days of payment cleared(expect weekends and holiday).

3,Your address on account will be used as shipping address unless you inform us different  address in advance. So please make sure that your address is up-to-minute.

4,If your order is very large,we can supply to free sample, you just need to bear the shipping costs.

5,Reply within 24 hours.

6,Quick delivery.

7,The brand can do yours and we accept OEM.

8,Our transports as follows,we also can transport as your requirements.

If you are interest in this model, pls feel free to contact me!   

Looking forward to your enquiry!